Unable to prime jet pump

Users who are viewing this thread

Dmand310

New Member
Messages
1
Reaction score
0
Points
1
Location
Cochrane Ontario Canada
So I come home late last week to find I had to water, but the jet pump was still running. As I didn't know how old the pump was and had a spare on hand I replaced it. Filled up both hoses going into the and reconnected everything back up. Filled up the pump with water and started the pump up. The pump would not prime, tried numerous times. So I decided to take everything back apart so I can make sure both pipes going to the well were completely full of water. If I let the water sit in the pipe for a few hrs the water level goes down. Any idea what the problem would be.

Thanks,
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks