tub spout nipple

Users who are viewing this thread

pedixon

New Member
Messages
6
Reaction score
0
Points
0
Location
Wa.
Hi all. I am installing new tub shower valve ( Delta) and was wondering if it is ok to use 1/2 gal. pipe from valve to drop ear , and the same for the tub spout nipple.The rest of the house will be pex. Id rather not use copper or brass(already have the gal.) Thanks Phil
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,771
Reaction score
1,191
Points
113
Location
New England
The coating and threads on that galvanized nipple are not perfect and will rust someday. Why chance it - use a brass one now and never worry about it.
 

Terry

The Plumbing Wizard
Staff member
Messages
29,946
Reaction score
3,460
Points
113
Location
Bothell, Washington
Website
terrylove.com
Also, you can't use PEX from the valve to the drop ear 90
The restriction forces water up and out of the shower head when filling the tub.

delta-tub-spout-install.jpg
 
Last edited:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks