Toto Washlet+ T40 on a T20 toilet?

Users who are viewing this thread

Cranraspberry

New Member
Messages
10
Reaction score
0
Points
1
Location
DC
Toto is going to be the end of me! Finally narrowed things down to the toilet I want and the Washlet I want - both are Washlet+ so should be a breeze, right? Well turns out for the recent S500/550e series they moved from T20 to T40, aka the hole is now slightly lower than it used to be. Of course the toilet I chose is T20.
Does anyone with experience know if it would be possible to install the newer washlets on the older T20 toilets?

Apologies for using photos from the forum, but here is the older T20 setup:
C2424194-ED38-466C-A549-EB6134756FB9.jpeg


And this is T40:
FA99C0EA-A815-4CB0-A4C8-D243F4BAB92A.jpeg


If it matters, the toilet I was looking at was the Ultramax II CST604CEFGT20 - not Dynamax but regular Hurricane flush, 17 3/4 tall and a large water spot.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks