Toilet and Shower drain / vent question (annotated pics attached)

Users who are viewing this thread

JHorack

New Member
Messages
14
Reaction score
0
Points
1
Location
Cincinnati, OH
right now I have a shower drain that vents to the roof then drains via the toilet drain pipe. (this will all be in a soffit)
I had to get a little "creative" with the connection from the 3" pipe to the main. I'm wondering if there is anything technically incorrect with it. Thanks again for your advice!

jhorack-05.jpg


jhorack-06.jpg


jhorack-07.jpg
 
Last edited by a moderator:

Reach4

Well-Known Member
Messages
38,892
Reaction score
4,435
Points
113
Location
IL
You used clear primer, or is this an incredible mock-up?

The lower left PVC fitting looks a little misaligned on the upper side.
 

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,459
Points
113
Location
Bothell, Washington
Website
terrylove.com
It looks pretty good until you get to your 3" vertical which looks pretty wonky. Don't be afraid to use a 45 to angle over to the vertical to get to the 90 that drops down.
 

JHorack

New Member
Messages
14
Reaction score
0
Points
1
Location
Cincinnati, OH
Thanks Terry! That tip helped tremendously. I took off the 90 and used a 45 then a 90

jhorack-03.jpg


jhorack-04.jpg

vertical_3inch_a.jpg
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks