thermostat problem

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by colinsidney, Dec 15, 2008.

  1. colinsidney

    colinsidney New Member

    Dec 15, 2008
    HI, i replaced a very old header tank and my copper cylinder,the old cylinder boiled the water because the immersion thermo was the old single type with no overheat control,so all parts brand new, the prob i have is the new overheat stat, was constantly activating,so a second, new heating element and thermostat was fitted again, but still the problem remains,any ideas welcome thanks, Colin [vented cylinder /hot water only]
  2. hj

    hj Moderator & Master Plumber Staff Member

    Aug 31, 2004
    Cave Creek, Arizona

    We have no idea what the thermostat is controlling, but if the heat can heat the water by convection even with the thermostat shut off, it WILL overheat to the point where the high limit is activated. We cannot diagnose it from here, and with a vented tank, it sounds like a United Kingdom system.
  3. Sponsor

    Sponsor Paid Advertisement

  4. colinsidney

    colinsidney New Member

    Dec 15, 2008
    overheat stat

    You are correct, hj iam in the uk the copper tank 42 gallon is heated by an 27 inch heating element, the element is temp controlled by a replaceable internal 2 pin thermostat, which is wired in series to live feed has a built in secondary overheat button for protection,i have tried heat ranges from 60- 80 degrees, but the cutout still activates,after the heat gets to its setting or beyond the heater is connected to the mains E/L/ neutral in the usual way,the cylinder is gravity fed from an over head tank, as i have said i have replaced this new gear,twice [element and stat] still the fault remains, Colin
    Last edited: Dec 18, 2008
Similar Threads: thermostat problem
Forum Title Date
Plumbing Forum, Professional & DIY Advice problem with water heater thermostat? Apr 14, 2008
Plumbing Forum, Professional & DIY Advice Replacing Kohler K-78913 cartridge in K-400 thermostatic mixing valve Wednesday at 2:33 PM
Plumbing Forum, Professional & DIY Advice thermostatic mixing valve (Honeywell AM-1 1070) seized after <3 years? Jul 31, 2016
Plumbing Forum, Professional & DIY Advice Thermostatic Mixing Valve May 5, 2016
Plumbing Forum, Professional & DIY Advice Fantini shower thermostatic mixing valve with 3 vol controls no cold water Mar 29, 2016

Share This Page