We bought a bidet for a toilet in the house. For it to work, we need a hot water line to the bidet. The sink is 3ft away, and I want to use a tee valve (or whatever you call it) to split the sink hot water and send one line to the bidet. I cannot find a 3ft supply line. Any advice on how I can do this?
Supply Line Extension for bidet
- Thread starter Marty S.
- Start date
Users who are viewing this thread
What kind of bidet only uses hot water. Yikes!
There are many lines that would be long enough. What threads are you trying to match up?
The bidet seats I sell and install use cold water and plug into an outlet for heating the water.
There are many lines that would be long enough. What threads are you trying to match up?
The bidet seats I sell and install use cold water and plug into an outlet for heating the water.
Last edited:
Sponsor
Paid Advertisement
Tuttles Revenge
In the Trades
- Messages
- 4,183
- Reaction score
- 1,444
- Points
- 113
Ooops.. I saw the pic that Terry posted of the Jaclo bidet.. Yeah.. that bidet needs to be supplied by a tempering valve. I've installed the exact same setup.
