Submersible Well Pump Controller

[scottu5]

Hello all,

new here. I have a submersible well pump and a Grundos controller (pics attached). I don’t know what size pump motor (e.g.; 3/4, 1 hp, etc). Breaker in panel is 20 amp.

I want to replace the controller, but other than markings on the capacitor and the box stamped Grundos, all other markings are worn off. So haven’t been able to cross reference to anything.

I have been unable to locate anything resembling what I have by searching Grundos, but need to find a replacement brand.

thanks in advance,
scott

 

[Valveman]

Should be compatible with any submersible pump control box. like the ones you find at the box stores like TS.

 

[Sponsor]

 

[scottu5]

Thank you sir. I have been looking at them, but unable to determine what hp the pump is. It appears the capacitor (in my box) handles 3/4 all the way to 1.5 hp. I have a 20 amp circuit breaker in the panel. I am guessing a 3/4 hp well pump motor?

but not certain.
thanks again.

 

[Valveman]

The 105-126 MFD start capacitor is made for a 1HP.

 

[scottu5]

Thank you Valveman!
Appreciate the information.
scott