Rough in Washer/Bathroom

Users who are viewing this thread

Robert-SC

New Member
Messages
2
Reaction score
0
Points
1
Location
Columbia, South Carolina
Am I going in the right direction?
1- in picture #3, the Sanitary Tee with Right 2" inlet (Washer Drain) with the added clean out plug on top?
It drops 2 feet into an elbow. This leads out to a new 3" pipe which will join the kitchen drain system. pic #4

2- Is 90 elbow ok to use as shown to carry waste from washer/laundry sink down to an 8 ft long pvc to the Sanitary Tee with Right 2" inlet in picture #3?

3-Venting all this to a single new vent stack? I could run the washer vent straight to roof (front of house) but prefer to use an elbow in the attic bring it back 10 feet to the new vent stack that will be needed for the new bathroom. This new stack goes up to roof (back of house)
4-any other helpful info to make this code compliant?
 

Attachments

  • 1DSC_0015.JPG
    1DSC_0015.JPG
    93.1 KB · Views: 108
  • 2DSC_0003.JPG
    2DSC_0003.JPG
    49 KB · Views: 108
  • 3DSC_0013 (Custom).JPG
    3DSC_0013 (Custom).JPG
    70.3 KB · Views: 122
  • DSC_0009.JPG
    DSC_0009.JPG
    77.4 KB · Views: 118
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks