Richmond Rheem unit heat cycling

Users who are viewing this thread

William Mallette

New Member
Messages
1
Reaction score
0
Points
1
Location
MS
My Richmond Rheem indoor condensing unit (model number RMTGH95DVLN-1) will fire up as if a hot water valve was opened to start have it produce hot water. However, it is doing this when no water anywhere is running or turned on. It will fire up for about 10 seconds, then it will stop and do it all again 2 or 3 times a minute. No error codes are being displayed.

The water heater produces hot water correctly when a faucet is turned on, but in between uses, it cycles like I described above. It is newly installed. It is runs on natural gas.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks