Repaired Main Pipe at Frost Line. No Water Now

Users who are viewing this thread

nhmichelle

New Member
Messages
1
Reaction score
0
Points
0
Location
New Hampshire
Hello.

Our pipes froze recently and it caused the main poly line to explode just above the frost line. We repaired the leak, threw the water main back on, and hit the circuit breaker for the pump. We can hear it humming but no water is coming up from the submersible pump in our well. I made sure to recharge the air in the well tank back up to the 28 PSI that is recommended.

We've tried everything and I'm just not sure why no water is coming up from the well now. I checked the pressure switch and it has plenty of juice at 240 coming in.

Any recommendations would be greatly appreciated. Thank you
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks