Hello,
I’m renting an house that has a Kinetico 4040 OD.
There’s no installation date on the system (will try to contact the company on the sticker..) but seems in decent conditions.
The tank only had residual water and the brine well was full of salt crystals, to the point that it could not operate as the salt was overflowing thru the cover.
I guess the previous tenant did not bother to use it, although the bypass valve was set on green.
I cleaned the tank and the well, filled with salt pellets and run 2 regen cycles, as per manual.
Is there anything else I need to pay attention to?
Thanks in advance.
I’m renting an house that has a Kinetico 4040 OD.
There’s no installation date on the system (will try to contact the company on the sticker..) but seems in decent conditions.
The tank only had residual water and the brine well was full of salt crystals, to the point that it could not operate as the salt was overflowing thru the cover.
I guess the previous tenant did not bother to use it, although the bypass valve was set on green.
I cleaned the tank and the well, filled with salt pellets and run 2 regen cycles, as per manual.
Is there anything else I need to pay attention to?
Thanks in advance.