Recommendation for Pipe Material Pump

hull_tech

New Member
Messages
2
Reaction score
0
Points
1
Location
Florididuh
I want to redo the piping on my Goulds J7S shallow well pump when I install a CSV next month. Can somebody recommend the best pipe material for the immediate suction and outlet ports of the pump? PVC, brass or galvanized steel? This will be for potable water use.
 
PVC or polyethylene. Brass right at the pump would be good if putting your check valve there. PVC female threads are better avoided unless fittings are schedule 80 or more.

Where will the check valve be? The closer to the intake, the better.

A foot valve is a check valve combined with a screen.
 
Are you suggesting a check valve in addition to foot valve, or check valve instead of a foot valve? I have a jet pump in a shallow surface well I need to resurrect.
 
Are you suggesting a check valve in addition to foot valve, or check valve instead of a foot valve? I have a jet pump in a shallow surface well I need to resurrect.
I would say as a check valve with no other check valve. But I could view the semantics differently than some others.
 
Back
Top