Rear Flush Toilet

Users who are viewing this thread

jdrm

New Member
Messages
3
Reaction score
0
Points
1
Location
Nevada
Hi,

Thanks for any help.

I have an old rear flush toilet in a bathroom I'm remodeling. I cannot locate the manufacture anywhere on the toilet so I do not know who made it. Anyway, this toilet has no anchor bolt holes to secure it to the floor. The only holes are the ones which secures the back to the outlet flange. My question is how do I secure it to the floor?

Thank you
 

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,459
Points
113
Location
Bothell, Washington
Website
terrylove.com
A picture 800 pixels or less would be nice.
You can caulk the bowl to the floor using PolySeamSeal. I like the clear stuff.

loctite-tub-tile.jpg
 
Last edited:

jdrm

New Member
Messages
3
Reaction score
0
Points
1
Location
Nevada
Thanks for the info. The original install by ? had wood strips on each side of the base I knew that was not correct and was mistified about the correct way to install.

Thank you
 

jdrm

New Member
Messages
3
Reaction score
0
Points
1
Location
Nevada
Finally found out this toilet is an Eljer Orlando.
eljer-toilet-image-orlando.jpg
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks