I ran drains for a double vanity using a double san tee (aka, cross) and after reading many complaints here about snaking double sinks with crosses, I installed a cleanout above the cross. I figured I would just cover it with the smallest access panel I could find, but my vanity, it turns out, has a nice wood back. Is there was a sleeker way to do this that doesn't require me cutting out a large piece of the back of my new vanity?
Hindsight being 20/20, I should have used regular tee instead of a cleanout tee, and extended a section of pipe a couple inches past the wall and put a cleanout on the end of that. Then I could have just used a regular 1.5" escutcheon, but too late for that now...
Hindsight being 20/20, I should have used regular tee instead of a cleanout tee, and extended a section of pipe a couple inches past the wall and put a cleanout on the end of that. Then I could have just used a regular 1.5" escutcheon, but too late for that now...