Pentair 5810 XTR2 repeating cycle

Users who are viewing this thread

Firethorne

New Member
Messages
18
Reaction score
1
Points
3
Location
Katy, Texas
I have a Pentair 5810 XTR2 water softener, and it keeps on repeating backwash 2 times at 10 minutes each, and then moved to draw 3 times at 50 minutes each time. I just checked and it just resets the timer to do another 50 minutes of draw. Any idea why it keeps on doing this?

We checked all the screens, orifices, and everything is clean, no clog / debris. We have 3 bags of salt in the brine tank.

Thanks for any advice.
 

Attachments

  • View recent photos.jpg
    View recent photos.jpg
    48.6 KB · Views: 87

Firethorne

New Member
Messages
18
Reaction score
1
Points
3
Location
Katy, Texas
5810 XTR2 with touch screen metered water softener
48,000 grains
18x40 10% Resin loaded with gravel, blue tanksW/TOUCH SCREEN METERED WATER SOFTENER 48,000 GRAINS,
1" plastic bypass with upper and bottom distributor gasket
 

Attachments

  • IMG_5212.JPG
    IMG_5212.JPG
    95.2 KB · Views: 78
  • IMG_5213.JPG
    IMG_5213.JPG
    86 KB · Views: 80
  • IMG_5214.JPG
    IMG_5214.JPG
    81.5 KB · Views: 77
  • IMG_5215.JPG
    IMG_5215.JPG
    81.9 KB · Views: 76
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks