Peerless shower, Help Please, shower valve handle stuck, trying to replace cartridge

Users who are viewing this thread

Jeff Boshet

New Member
Messages
8
Reaction score
1
Points
1
Location
California
The trim says this is a peerless valve, but it does not have the set screw on the side of the handle, it has the screw directly in the end of the handle which I removed.

I am unable to remove the handle to get to the cartridge...

Helllllllp.... please...

stuck handle.jpg
 

Jeff Boshet

New Member
Messages
8
Reaction score
1
Points
1
Location
California
Do I need a puller device to pull it off if it is corroded in place?
I think I'll need to go to the hardware store tomorrow to buy a shower handle puller.
I think it is simply corroded in place
 

Jeff Boshet

New Member
Messages
8
Reaction score
1
Points
1
Location
California
The puller did the trick. It was simply corroded in place.


I just left you another small tip in your tip jar for your kind help :0)
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks