Need some advice from those here much more knowledgeable that I am. Have a small bathroom downstairs (original construction 1964), top portion home extended and rebuilt 1995. The toilet is an old crane round toilet and the ROUGH IN is exactly 15". Here are other dimensions, if it helps:
From back wall to front of existing toilet 30"
Side wall to the left side of toilet to trim edge of door 30"
Width between end of small vanity to the left side wall 25 1/2"
I checked in basement to see, if it would be possible to maybe relocate the rough in and unfortunately, no room to move it from where it is. Please excuse the sketch with the measurements. This is what I'm dealing with. Should I just reuse the toilet. I am taking up the tiles and may raise the floor about 1/2" adding cement board and retiling in order for hallway to come flush with bathroom floor. Assume cast iron ring and who knows what shape it will be in. Should I just reuse the same toilet or is there another option like the Toto system which confuses me. Any and all help/explanation/advice would be much appreciated. Thank you all in advance for the help.
From back wall to front of existing toilet 30"
Side wall to the left side of toilet to trim edge of door 30"
Width between end of small vanity to the left side wall 25 1/2"
I checked in basement to see, if it would be possible to maybe relocate the rough in and unfortunately, no room to move it from where it is. Please excuse the sketch with the measurements. This is what I'm dealing with. Should I just reuse the toilet. I am taking up the tiles and may raise the floor about 1/2" adding cement board and retiling in order for hallway to come flush with bathroom floor. Assume cast iron ring and who knows what shape it will be in. Should I just reuse the same toilet or is there another option like the Toto system which confuses me. Any and all help/explanation/advice would be much appreciated. Thank you all in advance for the help.