No water with new shower

Users who are viewing this thread

LantierinVA

New Member
Messages
1
Reaction score
0
Points
1
Location
22554
Had plumber install new shower from Home Depot. BWE 10 in sq Bathroom Shower combo. I finished all the tiling and went to turn it on, nothing. Checked for clogs, nothing. Pulled the cover off of the faucet but don't see any adjustment screws. When I turn on the faucet you can hear air coming out for a short time, then it stops. Removed the shower arm and a little water was there.

20220520_104309.jpg
 

Breplum

Licensed plumbing contractor
Messages
1,904
Reaction score
767
Points
113
Location
San Francisco Bay Area
all good valves have isolation stops on the inlets.
make sure they are open, then if not solved, call your plumber.
We NEVER recommend off brand mfrs., least of which China serves as an example.
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
Make sure that both hot AND cold are turned on, or it's common for a shower valve to not output any water.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks