What do you guys do when there isn’t room for fittings?
I’ve lowered my subfloor for a curbless shower. Unfortunately the 2x4 framing is now in the way of my DWV plumbing.
Even if I put the wye all the way against the joist, I can’t see how I’ll be able to properly get the 1-1/2” line off of the wye to where the vent needs to be. The 2” line is barely under the 2x4 framing, which further restricts what I can do. If I drill a 3” hole it may allow me to put the wye a little further down the line, which may help a little. But I’m still not sure how I could make it to the vent.
Any input would be appreciated.
I’ve lowered my subfloor for a curbless shower. Unfortunately the 2x4 framing is now in the way of my DWV plumbing.
Even if I put the wye all the way against the joist, I can’t see how I’ll be able to properly get the 1-1/2” line off of the wye to where the vent needs to be. The 2” line is barely under the 2x4 framing, which further restricts what I can do. If I drill a 3” hole it may allow me to put the wye a little further down the line, which may help a little. But I’m still not sure how I could make it to the vent.
Any input would be appreciated.
