Need help locating a sink bowl

Users who are viewing this thread

Gagecalman

Active Member
Messages
160
Reaction score
35
Points
28
Location
Baltimore, MD
I'm trying to help a friend with a cracked sink bowl.
I believe it was bought at Home Depot years ago.
The opening is only 48" so the 49" granite top was installed in the rough opening before the drywall. Trying not to have to gut the walls.
I was wondering if I could find a replacement sink bowl and replace the cracked one.
This one has a unique shape.
Thanks for looking and any help would be appreciated!
Rogers bathroom 013.jpg
Rogers bathroom 001.jpg
Rogers bathroom 002.jpg
 

Attachments

  • Rogers bathroom 003.jpg
    Rogers bathroom 003.jpg
    81.2 KB · Views: 70
  • Rogers bathroom 006.jpg
    Rogers bathroom 006.jpg
    58.6 KB · Views: 73
  • Rogers bathroom 004.jpg
    Rogers bathroom 004.jpg
    63.1 KB · Views: 70
  • Rogers bathroom 008.jpg
    Rogers bathroom 008.jpg
    56.7 KB · Views: 68
  • Rogers bathroom 009.jpg
    Rogers bathroom 009.jpg
    56.5 KB · Views: 71
  • Rogers bathroom 010.jpg
    Rogers bathroom 010.jpg
    53.1 KB · Views: 79
Last edited by a moderator:

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,458
Points
113
Location
Bothell, Washington
Website
terrylove.com
I see you have the spec's for the Caxton. It does look to have a different shape to it though.
What are the dimensions on the bowl you have? An any information on the cabinet brand to see if that bowl can be backtracked?

k-2210-spec.jpg
 

Gagecalman

Active Member
Messages
160
Reaction score
35
Points
28
Location
Baltimore, MD
Hi Terry,
Thanks for the quick reply.
Yea the Caxton doesn't look right.
The opening in the top is 17-7/8” wide by 12-3/4” deep.
I looked on HD's site and the name Halstead Products comes up to answer some of the questions.
I googled it and they sell flooring. Maybe not in the sink business anymore. I sent them an email anyway.
This is a drawing I found on HD. A little skinnier but the shape doesn't look right.
 

Attachments

  • Rogers vanity top Halstead.pdf
    91.5 KB · Views: 61

Tuttles Revenge

In the Trades
Messages
4,132
Reaction score
1,410
Points
113
I didn't see anything with that same flat back area. All the ovals are very round across the back. The only similar I see are oval Overmounts.. But not sure that those would be big enuf to undermount in the same hole.

May need to see if replacing the entire top is More or Less than having someone cut a new oval shape.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks