Name of particular molding

[KenH]

Hi! Can someone tell me the name of a molding that would be used to bridge the gap between wainscot stiles/rail and the actual panel? It would have a rabbet around 1/2" on one side. I found one at the HD website but was not crazy about the profile...anyway there was no actual designated name that I could find.
Thanks.

 

[Reach4]

Chttp://remodelingguy.net/2009/03/wainscoting-and-chair-rails/.

The picture is from http://remodelingguy.net/2009/03/wainscoting-and-chair-rails/ Incidentally, I have thought that a chair rail could have a groove cut into the back side that would be used to conceal a coax or cat 6 cable.

 

[Sponsor]

 

[KenH]

Thanks Reach4 - but these look like what I might use to cap off a top rail. I am looking for something that bridges a stile with the panel. Say the stile is 3/4" thick and I have a beadboard panel that is 1/4" thick. I need to cover that 1/2" difference.

 

[Reach4]

I think you are saying that you want a fillet molding.

Like this: http://www.homedepot.com/p/Alexandr...-Jointed-Cove-Moulding-03260-93096C/205576583 ? If not, how about a photo or sketch of what you are looking for.

 

[KenH]

Here is a crude drawing.

 

[Smooky]

Panel Mold? Rabbeted Panel Moulding?

 

[KenH]

Thanks Smooky - I think you might have it.