I am being told by technical support that they are not flow restricted, but they sure look like it to me? I need at least 2.5GPM but want as much as I can get... Looking at the 2510 first picture, and 2590 second picture. I cant get a picture of it, but the shower and bath port have a small 1/4" hole.
Moen Shower Valves, are these valves flow restricted? 2510 and 2590?
- Thread starter CaliSkier
- Start date
Users who are viewing this thread
TJRAD
Active Member
Here is the Flow chart provided by moen. at 60 psi the 2510 will do 4gpm.
Hope this helps.
Hope this helps.
Sponsor
Paid Advertisement
That helps greatly thank you.
2nd question, the difference between 2510 and 2590 is 2590 has "stops". I guess that lets you turn off one side so you could work on another? Do I really need that? Is that worth it, once its behind the tile and the wall I am never going to see it again.
Tell me why I would want the 2590 over the 2510
2nd question, the difference between 2510 and 2590 is 2590 has "stops". I guess that lets you turn off one side so you could work on another? Do I really need that? Is that worth it, once its behind the tile and the wall I am never going to see it again.
Tell me why I would want the 2590 over the 2510
TJRAD
Active Member
yes you want stops. very valuable when fixing your shower valve.
Thank you very much
Similar threads
