Moen Posi-Temp Stuck Shower Handle Adapter

Users who are viewing this thread

Rodz72ss

New Member
Messages
3
Reaction score
0
Points
1
Location
Central New Jersey
Trying to install a new cartridge but I can't remove the handle adapter, I have a puller but not sure how much force I should apply don't want to break anything, This sucker is stubborn.
What can I do?

moen-posi-handle-1.jpg
 
Last edited by a moderator:

Terry

The Plumbing Wizard
Staff member
Messages
29,942
Reaction score
3,459
Points
113
Location
Bothell, Washington
Website
terrylove.com
moen_flemming3.jpg


The handle comes off with the screw in the middle of the holder.
The chrome tube slides off.
You may need to remove the round plate at the wall also to get to the clip that holds the cartridge in. Pull upward on the clip to remove.
The cartridge comes out, the new one goes in, the clip drops back in to hold it.

moen1222.jpg
 

Dj2

In the Trades
Messages
2,611
Reaction score
258
Points
83
Location
California
- You can use a small drill bit to cut the plastic cartridge away. Work slowly, don't damage the brass body.

- You can call a pro.

- You can replace the body rough in.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks