Looking For Unusual Fitting

Users who are viewing this thread

go_hercules

Member
Messages
51
Reaction score
4
Points
8
Location
California
I would like to come off of a 3/4 NPT thread on a ball valve, and go to a 3/4 FIP Tee. However, I do not want to crank anything down tightly on the valve. So I was looking for an adapter fitting that would attach to the valve similarly to a water heater connector hose with the washer. Picture a water heater hose with no length, just the ends. Is there such a thing? It would look like this adapter that goes from garden hose to FIPS, but the end with the washer would be tapered thread just like a water heater hose.

hose-adapter-brass-075fht-x-050fips.jpg
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks