Looking for a fitting in Canada

[Plumber69]

I need to be able to solder this fitting in a 1 1/4 copper tee. I need the threaded part to be 3/4. I need it flush with the tee. If I use a FIP by cu adapter it will be to long. I need 5 of them. But can not find them in Canada online

 

[Fitter30]

Cut the backside off the bushing the male thread will sill have room to stick out the back side of the bushing if needed or a brass tee with male pipe adaptor.

 

[Sponsor]

 

[Plumber69]

Cut the backside off the bushing the male thread will sill have room to stick out the back side of the bushing if needed or a brass tee with male pipe adaptor.

I need to use a copper tee. The fitting in the picture will work with no modification. But I can't find it

 

[Fitter30]

https://www.ncicanada.com/locations-and-business-hours
71821177 fitting #

 

[Plumber69]

https://www.ncicanada.com/locations-and-business-hours
71821177 fitting #

Just what I was looking for. How did you find it? Usually im good on search engines

 

[Fitter30]

Nibco makes fitting ,went on their usa site ,did a search on that fitting got their part number. Looked to see where in canada is their zone offices.