Dave p
New Member
I have a economy 7 emersion combo cylinder no makers name,and it's covered in what looks like fake leather,small tank on top has overflow leak I've replaced ballvalve and reduced water level but after 5/6hours tank overflows again,mains stopcock in kitchen has pressure dial above reading 2/2.5 bar at side of cylinder it has a blending valve name on it is oventrop white cap. My basin has individual taps,bath has shower mixer and
I have leaver arm mixer at kitchen sink tap ,I isolated hot feed to kitchen tap which is only 4/5 weeks old thinking that cold feed could be bypassing hot and feeding cylinder then onto small tank above then on to overflow but again after 4/5 hours overflow leaking again any help /advice would be great
I have leaver arm mixer at kitchen sink tap ,I isolated hot feed to kitchen tap which is only 4/5 weeks old thinking that cold feed could be bypassing hot and feeding cylinder then onto small tank above then on to overflow but again after 4/5 hours overflow leaking again any help /advice would be great
