Kohler Wallmount

[Steve Wiedemann]

Evening All. I am looking to replace a Kohler wall mount toilet. (https://www.guillens.com/buy/product/K-3440-PT/389272 ) I am debating on going with a Gerber or American standard. After looking at the dimensions of the mounting bolts(https://hw.menardc.com/main/items/media/AMERI047/Install_Instruct/Install_901.pdf) . It appears the current Kohler looks like the mounting bolts are 8 inch on center. The ones I am looking at are 9 inch. I do not know what the carrier looks like and if it can be adjusted. But wondering if anyone done a conversion from them and had to change the carrier?

Thanks for the help!

 

[hj]

I have NEVER seen a wall mount toilet which had anything other than the standard mounting dimensions.

 

[Sponsor]

 

[Steve Wiedemann]

I have NEVER seen a wall mount toilet which had anything other than the standard mounting dimensions.

Thanks for the reply. That is what I was thinking thinking they would standard. It look like the distance from top bolts to the bottom bolts are correct. Are carriers usually adjustable width wise. Since I have to order a toilet, it would be hard to go to store and pick up a different one when i take the old one off. Like to swap the toilet out the day i remove it.

 

[hj]

The width of the bolts is CAST into the carrier as are the top ones, usually.