I am nearly complete with a shower remodel (shower only, no tub). I had a plumber remove the old and install a new shower valve body and cartridge. It is a Kohler model K-8304. Here is a link to the product page and instructions:
https://www.us.kohler.com/us/UNIVERSAL-RITE-TEMP-PB-VALVE-KIT/productDetail/valves/1071592.htm
The plumber installed the cartridge and the stops, which are currently in the closed position, and the water supply is turned on to the shower.
I am confused about the order of the final steps of flushing/testing/temp adjustment. The two different sets of instructions don't seem to make sense together, at least not to me! But then I am just DIYer.
And assuming I get all of this figured out, are the stops supposed to remain open when this is all done?
Thanks in advance for any help.
https://www.us.kohler.com/us/UNIVERSAL-RITE-TEMP-PB-VALVE-KIT/productDetail/valves/1071592.htm
The plumber installed the cartridge and the stops, which are currently in the closed position, and the water supply is turned on to the shower.
I am confused about the order of the final steps of flushing/testing/temp adjustment. The two different sets of instructions don't seem to make sense together, at least not to me! But then I am just DIYer.
And assuming I get all of this figured out, are the stops supposed to remain open when this is all done?
Thanks in advance for any help.
Last edited by a moderator: