Joist right below sill prevent to make a hole for the drain pipe

Users who are viewing this thread

Laostrich

Member
Messages
39
Reaction score
0
Points
6
Location
Los Ángeles, ca
I have another question on tub drain.
Kohler K-23856 spec stated that horizontal part can be minimum 9 1/2” to 14 13/16”. The tub has about 22 degree angle. Is this mean that vertical part of the drain can be slanted to push more close to the tub angle to have shorter horizontal drain length? Does vertical drain part always to need to be plumb?

The tub itself has 14” spec for the drain but that’s from tub rim edge to the center of drain. And I’m wondering instead of searching for 14” clearance, if 9 1/2” clearance would still work.
8F0F9E6E-4E2E-4CC9-BF7F-9074BF4809E9.jpeg
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks