we’re new to the well water life so this is completely new to us. we have a jet pump that will not turn on at all even though pressure has dropped and should turn on. Was advised the pump was relatively new. Checked pressure, to make sure it matches. Also, confirmed no issues with breaker/fuses. We’ve replaced the water tank, pressure switch (no lever on the side to manually conduct) & capacitor. . However, it is still doing the same. At first we would hit the contacts on the pressure switch & it would initially turn on, fill the tank, but it wouldn't turn back on once empty. Now, we hit the contacts, pumps turns on briefly and cuts back off & thats it. Not sure what it could be & unfortunately do not know of anyone in the are to hire. If someone could please point me in the right direction on what to do or check on next. TY!
Jet pump not turning on
- Thread starter chels5657
- Start date
Users who are viewing this thread
Is is wired for 115V or 230V? Check the voltage at the motor as it sounds like your getting about half.
Similar threads
