Makemenuconfig
Member
I need to install a trap primer for a couple of new construction emergency floor drains, and I'm under the UPC. There are a few solutions which go between the drain and trap that allow a 1/2" FPT connection from the trap primer, but they are all very backordered as far as I can tell.
However one of these options would get the job done:
1: https://www.supplyhouse.com/Spears-402-247-2-x-2-x-1-2-PVC-Sch-40-Threaded-Tee-Socket-x-FIPT
2: Glue one of these into a 2x2x1.5" san-tee: https://www.supplyhouse.com/Spears-438-247-2-x-1-2-PVC-Schedule-40-Spigot-x-Female-Bushing
Seems completely functional and equivalent to the commercially available but backordered solution: https://www.siouxchief.com/products...trap-primers/trap-primers/trap-primer-adapter
Do you think an inspector would question either of these alternative solutions?
However one of these options would get the job done:
1: https://www.supplyhouse.com/Spears-402-247-2-x-2-x-1-2-PVC-Sch-40-Threaded-Tee-Socket-x-FIPT
2: Glue one of these into a 2x2x1.5" san-tee: https://www.supplyhouse.com/Spears-438-247-2-x-1-2-PVC-Schedule-40-Spigot-x-Female-Bushing
Seems completely functional and equivalent to the commercially available but backordered solution: https://www.siouxchief.com/products...trap-primers/trap-primers/trap-primer-adapter
Do you think an inspector would question either of these alternative solutions?