Installing Cultured Marble for a tub wall

Discussion in 'Shower & Bathtub Forum & Blog' started by Terry, Apr 16, 2010.

  1. Terry

    Terry Administrator Staff Member

    Aug 17, 2004
    Bothell, Washington
    Sometimes when a tub is being replaced, a person will look at a poured marble product, instead of tile.
    I find it to be a nice product to use in a bathroom.
    It's very water tight, and the finish will last a long time.
    I also like that fact that you can get a custom pour that fits your job each time.
    Some kits don't really cover.

    I've used Designers Marble in Woodinville before.
    They custom pour for each job, though I've also seen standard kits you can buy. I've always like the custom pour.
    That way you can hide any "tear-out" that was needed for the new tub install.
    I would rather pay for a little more marble, and cut the drywall repair sub out completely.
    And the job looks that much nicer too.
    Marble cut and fit to the ceiling, rather then leaving a foot or so of painted wall looks very nice.
    Installers will typically order a little larger, and then trim the panels on site.

    Here is a link that might be useful: Designers Marble

    Last edited: Jun 3, 2010
  2. hj

    hj Moderator & Master Plumber Staff Member

    Aug 31, 2004
    Cave Creek, Arizona
    I am not sure if you are doing it, or having it done, but I always subcontract it to the marble company. They measure, pour, and install it.
  3. Sponsor

    Sponsor Paid Advertisement

Similar Threads: Installing Cultured
Forum Title Date
Shower & Bathtub Forum & Blog Problem installing new tub - Floor uneven Oct 10, 2017
Shower & Bathtub Forum & Blog Installing new Mediterranean Bronze trim for Moen Posi-Temp Jun 15, 2017
Shower & Bathtub Forum & Blog Installing new tub - newbie questions Apr 25, 2017
Shower & Bathtub Forum & Blog Installing New Shower Including Rough In For Control Valve Apr 23, 2017
Shower & Bathtub Forum & Blog Demo'd Fiberglass Shower & Installing New Tile Shower But I Have Questions??? Mar 25, 2017

Share This Page