Hunter pump start relay

Users who are viewing this thread

David P

New Member
Messages
1
Reaction score
0
Points
1
Location
Florida
Checked irrigation this morn , nothing was happening, no water no running pump. Relay is humming, assuming that it is the relay, can it be repaired or must be replaced.I am not a troubleshooter kind of guy, although I am learning.Any advice would be appreciated, thanks,
DavidP
 

Greenmonster123

Active Member
Messages
192
Reaction score
33
Points
28
Location
Sag Harbor, New York
Check the pump breaker. If it's humming the contactor is likely working but you should check the line and load sides of the contactor for power while the timer is calling for water. If the contactor is in fact bad you could buy a new one from grainger and installit in the hunter box but it is probably easier to replace the whole thing.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks