Hello,
Im doing a ton of learning on well wanter since our new house has it. We move in on Friday!
The current setup is as follows, in order:
-500' well, pump down there
-2500 gal tank above ground, with float switch for well pump
-Grundfos SCALA2 booster pump (leaking a little)
-30/50 pressure switch
-86 gallon pressure tank
-Basic GE 10x4.5" all-in-one house filter
-Water softener I know little about still
Problem:
PSI dips pretty low once that tank drains, it sits at 35 while not in use.
Wants:
I would like it to be +40 PSI all the time for showers and my RO.
no hammering
RELIABLE
Question:
So im reading in to the CSV setups and they make sense to me why their so reliable. If I were to change my setup in advance (vs fixing the leaking pump) what kind of jet pump should I be looking at? anyone have a specific pump for a single family 1 story home.
New pump + CSV + 40/60 switch + smaller pressure tank... sound about right? (and a better filter setup once I test the water and confirm what it needs)
Im doing a ton of learning on well wanter since our new house has it. We move in on Friday!
The current setup is as follows, in order:
-500' well, pump down there
-2500 gal tank above ground, with float switch for well pump
-Grundfos SCALA2 booster pump (leaking a little)
-30/50 pressure switch
-86 gallon pressure tank
-Basic GE 10x4.5" all-in-one house filter
-Water softener I know little about still
Problem:
PSI dips pretty low once that tank drains, it sits at 35 while not in use.
Wants:
I would like it to be +40 PSI all the time for showers and my RO.
no hammering
RELIABLE
Question:
So im reading in to the CSV setups and they make sense to me why their so reliable. If I were to change my setup in advance (vs fixing the leaking pump) what kind of jet pump should I be looking at? anyone have a specific pump for a single family 1 story home.
New pump + CSV + 40/60 switch + smaller pressure tank... sound about right? (and a better filter setup once I test the water and confirm what it needs)