Help ID'ing a mixing cartridge

Users who are viewing this thread

JonRankin

New Member
Messages
6
Reaction score
3
Points
3
Location
California
I'm trying to figure out the brand of a mixing cartridge for a shower valve. It's a two handle valve with no manufacturer logo or marks, except the letters on the knob covers, in the attachment. One handle controls the temperature mix and the other controls the flow rate. The cartridge for the temperature mix is leaking around the broach. I haven't been able to find a comparable cartridge at any local hardware store or plumbing supply store.

Thanks!

Logo on handle:

2022-11-15_12-40-49_IMG_2861.JPG


Valve exterior - mix handle on bottom, flow rate handle on top:
2022-11-15_12-58-03_IMG_2862.JPG


Valve body:
2022-11-10_08-53-34_IMG_2761.JPG


Full mix cartridge:
2022-11-15_12-59-13_IMG_2863.JPG


Stripped down mix cartridge:
2022-11-10_12-42-15_IMG_2765.JPG
 

Neil Binda

In the Trades
Messages
157
Reaction score
42
Points
28
Location
Toronto
This looks like a Huber valve .

Another part is still stuck in the rough in

Suppliers like Watermark , California faucets, Moen and Huber also uses the same rough in.

You still have to remove the other part in the valve .


Attached is the cartridge you need as well


Huber-2402PL-Elemento-Cartucho-Termostatico-Plus.jpg
 

JonRankin

New Member
Messages
6
Reaction score
3
Points
3
Location
California
Holy cow, thank you so much! Never even occurred to me that I only had half of it. Really appreciate your response!
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks