Have a leaking bath faucet that I need to get a cartridge for. Wish I had kept records of faucet make/models... Installed in 2004. And which parts are supposed to move on the threaded body - the steel washer on top or the threaded part on the bottom that had a toggle part to lock onto the bottom of the sink? I am guessing the bottom part. The toggle part popped off in getting it out.
The spline shaft has one tooth missing intentionally - perhaps this is a clue to make. Didn't find any make or model on top or below.
I have quite a few faucets and this is only the third one to leak in 12 years. This one is the cold valve - should I replace the hot while I am doing this to avoid future trouble? What's the life of these valves? Or are the failures just random?
The spline shaft has one tooth missing intentionally - perhaps this is a clue to make. Didn't find any make or model on top or below.
I have quite a few faucets and this is only the third one to leak in 12 years. This one is the cold valve - should I replace the hot while I am doing this to avoid future trouble? What's the life of these valves? Or are the failures just random?