bbarker319
New Member
Hello all,
I just installed a Stiebel Eltron DX 15-2 Select.
I'm not a licensed plumber or electrician but have decent experience doing both as I'm wrapping my personal home build.
Wired it to a double pole 60w breaker, connected both wires and ground inside the until, ran the water through it to make sure all the air was out. Flipped the breaker and the display does not come on/unit power on. The unit is getting power.
There is a "AE 3" button ypur supposed to press before connecting power and it's supposed to click and lock. It just presses but does not lock down.
I am at a loss. Not sure where the problem lies..?
Any help would be greatly appreciated!
I just installed a Stiebel Eltron DX 15-2 Select.
I'm not a licensed plumber or electrician but have decent experience doing both as I'm wrapping my personal home build.
Wired it to a double pole 60w breaker, connected both wires and ground inside the until, ran the water through it to make sure all the air was out. Flipped the breaker and the display does not come on/unit power on. The unit is getting power.
There is a "AE 3" button ypur supposed to press before connecting power and it's supposed to click and lock. It just presses but does not lock down.
I am at a loss. Not sure where the problem lies..?
Any help would be greatly appreciated!
