Grundfos pump orientation

Users who are viewing this thread

Breplum

Licensed plumbing contractor
Messages
1,948
Reaction score
782
Points
113
Location
San Francisco Bay Area
It isn't the electrical box that matters, it is all about air entrapment and keeping the rotor from being in an entrapped air lock.
 

Fitter30

Well-Known Member
Messages
4,347
Reaction score
795
Points
113
Location
Peace valley missouri
Manufacturers install manuals are written for the proper operation. Motor in the horizontal. Need to reposition the motor for easier wiring. Shows in the install manual.Drain or valve valve off system or pump and loosen four screws.
 
Last edited:

Plumber69

In the Trades
Messages
2,380
Reaction score
214
Points
63
Location
Prince Rupert, British Columbia
It isn't the electrical box that matters, it is all about air entrapment and keeping the rotor from being in an entrapped air lock.
It clearly says electrical must face down

Screenshot_20221126-102137_Drive.jpg
 
Last edited by a moderator:

Breplum

Licensed plumbing contractor
Messages
1,948
Reaction score
782
Points
113
Location
San Francisco Bay Area
In the case of those Grundfos boxes they want splash protection, but the next paragraphs refer to what I was speaking to, which all wet rotor circulators need to heed re air.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks