Gas poly as conduit— connecting to sweep

Users who are viewing this thread

Ambassador

New Member
Messages
24
Reaction score
0
Points
1
Location
Chicago
Hey guys, I got 1000' of gas tubing for super cheap. It's much more than I need, so I intend to use the rest for burial conduit and cat-6 conduit in addition to the gas. If it were you, how would you go about connecting this yellow poly gas tubing to the sweep from the LB?
 

Stuff

Well-Known Member
Messages
1,221
Reaction score
130
Points
63
Location
Pennsylvania
Would not use it as too many issues get brought up. Cat-6 as low voltage cable is covered by the NEC and gas tubing is not listed for this use.
 

Ambassador

New Member
Messages
24
Reaction score
0
Points
1
Location
Chicago
I found those 3/4 compression fittings fit perfectly over the 3/4. Super cheap conduit for LONG runs and watertight. I just tossed it in the ground in case I ever need to pull something later.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks