Desert_Guy
New Member
I could use some help or guidance on settings for a Fleck 7000 SE valve on a 32k grain unit (1.0 cu ft of resin).
Fleck 7000SE valve with new Piston, seals + brine valve. Unit was not previously drawing brine, but rebuild has resolved BD issue and unit appears to be working and drawing brine now.
install New 1.0 Cubic Feet of Purolite C100E Resin (32k grain softener)
We have 4 people in our house.
From City FAQ:
City water hardness average is 16.5 grains/gallon.
The iron content is less than 0.3 PPM
I have the programming guide found in the link below, just not sure what to put in for the settings for my application. Let me know if you need more details.
https://www.discountwatersofteners.com/content/manuals/Fleck-7000SE-Quick-Startup-Guide.pdf
Thank you!
Fleck 7000SE valve with new Piston, seals + brine valve. Unit was not previously drawing brine, but rebuild has resolved BD issue and unit appears to be working and drawing brine now.
install New 1.0 Cubic Feet of Purolite C100E Resin (32k grain softener)
We have 4 people in our house.
From City FAQ:
City water hardness average is 16.5 grains/gallon.
The iron content is less than 0.3 PPM
I have the programming guide found in the link below, just not sure what to put in for the settings for my application. Let me know if you need more details.
https://www.discountwatersofteners.com/content/manuals/Fleck-7000SE-Quick-Startup-Guide.pdf
Thank you!