Fleck 5810SXT Programming - Softener w/ GAC

Users who are viewing this thread

TxHr

New Member
Messages
22
Reaction score
0
Points
1
Location
Texas
Hello,

I recently had to replace my old faithful 7000SXT with a 5810SXT.

My tank is a 13x65 mid plate Vortex tank w/ 1.5cu 10% cross link resin in the bottom (48,000 grain capacity) and 1.5 GAC in the top, all controlled by a 5810SXT.

That said, I could use your help programming this setup, as my injector, brine and drain are different than my 7000.

5810SXT is setup:
Injector #1
BFLC .25
DLFC Button 3.5

I am also wondering if the above is even correct, given the size of my setup? I have the original blue injector, .5 BFLC and 4.0 DLFC from my 7000 should you guys recommend I go that route (or from what I’ve read, I should be running the yellow injector, .5 BFLC and 4.0 DLFC).

Here is what is input in the controller (and what I could use your help with):

DF: GAL
VT: 5810
RD:
CT:
C: 48x 1000??
H: 38
RS:
RC:
DO:
RT: 2:00a
BW:
BD:
RR:
BF:
FM:
RE: OFF
VR: OFF

I’m using Dixie Crystal iron fighter salt, as I am on well and have the propensity to pull iron (I’ve accounted for this in my hardness). We are a family of four and typically consume around 200 gal/day.


Thank you in advance,

Brandon
 
Last edited:

ditttohead

Water systems designer, R&D
Messages
6,088
Reaction score
455
Points
83
Location
Ontario California
DF: GAL
VT: 5810
RF:DF1B
CT:Fd
C: 36x 1000
H: 38
RS:cr
DO:28
RT: 2:00a
BW:6
BD:80
RR:6
BF:16
FM:t1.2
RE: OFF
VR: OFF
 

TxHr

New Member
Messages
22
Reaction score
0
Points
1
Location
Texas
DF: GAL
VT: 5810
RF:DF1B
CT:Fd
C: 36x 1000
H: 38
RS:cr
DO:28
RT: 2:00a
BW:6
BD:80
RR:6
BF:16
FM:t1.2
RE: OFF
VR: OFF

Thank you so much!

Should I run the blue injector w/ .5 BFLC and 3.5 DLFC or yellow injector w/ .5BFLC and 4.0 DFLC?


Thanks again,

Brandon
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks