Spartan01
New Member
Hi i have a Fleck 5800 that is being used as an air injection system instead of brine, it recently stopped drawing in air during BD cycle .
I cleaned the injector, check valve and brine valve already . I also replaced the piston since it was pretty gummed up with iron from the well water. It still will not draw air, is there something I am missing?
The injector cover has a gasket that has a little cross gasket that ripped and I am waiting for the replacement to come , would this cause this issue ? It isn't leaking..
I cleaned the injector, check valve and brine valve already . I also replaced the piston since it was pretty gummed up with iron from the well water. It still will not draw air, is there something I am missing?
The injector cover has a gasket that has a little cross gasket that ripped and I am waiting for the replacement to come , would this cause this issue ? It isn't leaking..
Last edited:
