I am looking for some help on installing a new filter system. I had a softner and acid tank installed seven years ago but I don't think they are working properly now. I believe the acid tank maybe plugged with iron and the resin in the softner maybe worn out.
I have four people living in the house with 2.5 baths. I had the pre filtered water tested at a lab and recieved the following results.
Hardness 196
PH 5.9
Iron 16.0
Magnesium 6.12
Manganese 5.86
Turbidity 21
I have asked a couple of local filter/well guys about reducing the iron to an acceptable level and one guys suggestion I dig a new well and the other gave me a quote of $14,000 for a "Water Dog" System.
Any suggestions? Thank you.
I have four people living in the house with 2.5 baths. I had the pre filtered water tested at a lab and recieved the following results.
Hardness 196
PH 5.9
Iron 16.0
Magnesium 6.12
Manganese 5.86
Turbidity 21
I have asked a couple of local filter/well guys about reducing the iron to an acceptable level and one guys suggestion I dig a new well and the other gave me a quote of $14,000 for a "Water Dog" System.
Any suggestions? Thank you.