Earthquake brackets for 10" tanks

Users who are viewing this thread

Lifespeed

Member
Messages
402
Reaction score
4
Points
18
Location
California
I'm guessing this is not that unusual of a request, but I have not had much success finding tank brackets for softener/filter tanks. Additionally, with the plumbing running between the wall and the softener tanks and the standoff required by the Fleck 7000SXT valve, I can not use brackets that bolt directly to the wall and try to place the tanks less than an inch away. Probably needs to be more like 6 inches from the wall.

Any recommends on these earthquake-country items?

water softener.jpg
 

Lifespeed

Member
Messages
402
Reaction score
4
Points
18
Location
California
Thanks for the links. I think the 12" strut clamp you mention is what I am after. I want something to grab onto the tank nicely, that I can mount to a 8" standoff from the wall without turning it into a fabrication project.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks