Does this copper male street adapter exist? (3/4 M to 1 FTG)

[Seiyafan]

I am looking for a 3/4'' male to 1'' FTG copper adapter, couldn't find such size on supplyhouse.

 

[Reach4]

CPVC? Sweat copper?

 

[Sponsor]

 

[Seiyafan]

oops, copper.

 

[Reach4]

1 inch ftg means the same size as 1 inch pipe.

3/4 inch male ... hmmm do you mean 3/4 MIP, or what?

Wild initial guess... would this help?
https://www.supplyhouse.com/Elkhart-30556-1-x-3-4-Copper-Bushing-FTGxC

 

[Seiyafan]

yes, I meant MIP. One side is male thread and the other is 1'' FTG (that I can insert into a 1'' press fitting).

 

[Reach4]

yes, I meant MIP. One side is male thread and the other is 1'' FTG (that I can insert into a 1'' press fitting).

https://www.supplyhouse.com/Viega-79400-1-ProPress-FTG-x-3-4-Male-Street-Bronze-Adapter-Lead-Free
https://www.supplyhouse.com/JW-50044-1-FTG-Press-x-3-4-Male-Copper-Street-Adapter

Alternatively you could solder something up in the shop.

 

[Seiyafan]

What's the difference between FTG press and regular FTG (like this: https://www.supplyhouse.com/Elkhart-30452-1-FTG-x-Male-Street-Adapter)? Is the FTG section longer on the press version?

 

[Jeff H Young]

I would expect a ftgxmip adapter to be either press or sweat . a bit confusing to me as well. I would think you could use a standard street 90 on press as well (provided you soldered prior to fitting and pressing)

 

[John Gayewski]

You cannot use standard fittings in a press system. They make special fitting adapters for press systems. They are longer and the stops clear the press tool when you crimp them. I've been there and had this problem.