Qwertyjjj
Member
- Messages
- 260
- Reaction score
- 2
- Points
- 18
Bit of a strange one.
At the end of the cycle, my dishwasher is not draining
The line has a high loop for the air gap.
To solve,
- I took the hose off the drain connector
- I turned on the pump manually on the cycle
- nothing came out
- I lowered the hose to ground level
- turned on the pump
- water came out
- I raised the hose to sink level and water kept coming out
This sounds just like a vacuum lock but it's happening each time.
Any ideas what to do?
There is about 2 ft of hose after the high loop, could that be causing the problem?
At the end of the cycle, my dishwasher is not draining
The line has a high loop for the air gap.
To solve,
- I took the hose off the drain connector
- I turned on the pump manually on the cycle
- nothing came out
- I lowered the hose to ground level
- turned on the pump
- water came out
- I raised the hose to sink level and water kept coming out
This sounds just like a vacuum lock but it's happening each time.
Any ideas what to do?
There is about 2 ft of hose after the high loop, could that be causing the problem?