Delta Monitor 1500 series trim - screws 5&7 o’clock

Users who are viewing this thread

Mark Phillips

New Member
Messages
2
Reaction score
0
Points
1
Location
Iowa
I have a 30 year old home with Delta Monitor 1500 series shower and tub faucets (3 of them). With separate controls for water volume and temperature. The finish is polished brass and is in terrible condition in need of replacement. Apparently there are two types of 1500 units. Those which the plate was held with bolts at 1&7 o’clock position, others like mine with bolts at 5&7 o’clock position. Delta tells me current 1700 series parts can be used for 1&7 configuration but they have no solution for mine (5&7 o’clock position). Does anyone know a source for replacement trim parts for Delta monitor 1500 series with bolt holes at 5&7? That way I won’t have to tear up the wall.
 

Marlinman

In the Trades
Messages
915
Reaction score
420
Points
63
Location
Jacksonville Florida
Delta's RP29405 1500 to 1700 conversion will work with both screw locations. The rough valve accepts both.

delta-29405-kit.jpg


delta-1500-series.jpg
 

Attachments

  • [Untitled] (77).pdf
    164.7 KB · Views: 457
Last edited by a moderator:

Mark Phillips

New Member
Messages
2
Reaction score
0
Points
1
Location
Iowa
Delta's RP29405 1500 to 1700 conversion will work with both screw locations. The rough valve accepts both.

delta-29405-kit.jpg


delta-1500-series.jpg

Note that it says it only has diagonal eschutcheon screw holes - those are the 1&7. My rough in only has holes for 5&7.
 

Attachments

  • 75B05E57-8739-4E9B-A851-D460EBD8ECAF.jpeg
    75B05E57-8739-4E9B-A851-D460EBD8ECAF.jpeg
    153.2 KB · Views: 377
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks