Converting single bathroom vanity to double

Users who are viewing this thread

Tli

New Member
Messages
3
Reaction score
0
Points
1
Location
Asheville Nc
Hello,

We are converting a single vanity to double in our bathroom. After tons of research, attached is the redone of pvc pipes….I think we did it right - hopefully! Really appreciate if you can take a look and provide comments please

Thanks, T
 

Attachments

  • 3C696A59-93FE-427C-BB6F-D196EDB394A7.jpeg
    3C696A59-93FE-427C-BB6F-D196EDB394A7.jpeg
    87.7 KB · Views: 119

John Gayewski

In the Trades
Messages
4,324
Reaction score
1,319
Points
113
Location
Iowa
Sorry no that's wrong. That left tee is on its side that's a no no. The piping left of the left drain where there's a90 looking up, that's also a no no.
 

John Gayewski

In the Trades
Messages
4,324
Reaction score
1,319
Points
113
Location
Iowa
You would be better off by cutting in a wye into the vertical drain on the right, crossing that stud down low then long sweep 90 up to a vertical tee for the left drain.
 

Tli

New Member
Messages
3
Reaction score
0
Points
1
Location
Asheville Nc
Sorry no that's wrong. That left tee is on its side that's a no no. The piping left of the left drain where there's a90 looking up, that's also a no no.
Hi John,
Thanks! Can you offer suggestions on how to correct the please?

Thanks, T
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks