Compression fittings for 3/4" and 1"

[Flapper]

Is it at all possible to get compression fittings (couplings, elbows, tees, etc) for 3/4" and 1" in the USA?! I searched everywhere and all I could find are lots of the smaller size stuff. There are 1" ball valves and 3/4" flexes with compression connections but why not fittings??

 

[Reach4]

for 3/4" and 1"

3/4" and 1" what? Copper pipe?

https://www.plumbingsupply.com/compress.html

Note that 3/4 inch copper is 7/8 OD and 1/2 copper is 5/8 OD, and OD is what they are called by.

http://www.acehardware.com/family/index.jsp?categoryId=2631284
http://www.menards.com/main/plumbin.../brass-compression-fittings/c-9433.htm?page=2

 

[Sponsor]

 

[Flapper]

Note that 3/4 inch copper is 7/8 OD and 1/2 copper is 5/8 OD, and OD is what they are called by.

http://www.acehardware.com/family/index.jsp?categoryId=2631284
http://www.menards.com/main/plumbin.../brass-compression-fittings/c-9433.htm?page=2

Ohh ok I see, thanks

 

[hj]

quote; Note that 3/4 inch copper is 7/8 OD and 1/2 copper is 5/8 OD, and OD is what they are called by.

ONLY if you are a refrigeration mechanic