Clack WS1 regeneration question . . .

[sjh]

After regeneration it shows 1,000 and (10) days later before a regeneration it shows 300-400 remaining. If I have a house full of guests and water use goes way up, will the valve regenerate before running out of soft water?

 

[Reach4]

Possibly not. You could be sure by scheduling a regen for the night before they arrive.

The user can initiate manual regeneration. The user has the option to request the manual regeneration at the delayed regeneration time or to have the regeneration occur immediately:

1. Pressing and releasing the REGEN button. “Regen Today” will flash on the display and the regeneration will occur at the delayed regeneration time. The user can cancel the request by pressing and releasing the REGEN button.
2. Pressing and holding the REGEN button for approximately 3 seconds will immediately start the regeneration. The user cannot cancel this request, except by resetting the control by pressing NEXT and REGEN buttons simultaneously for 3 seconds.